Products Used¶
This is a list of the products used in the project.
Adafruit USB Type C 3.1 PD to 5.5mm Barrel Jack Cable - 12V 5A Output¶
Adafruit USB Type C 3.1 PD to 5.5mm Barrel Jack Cable - 15V 5A Output¶
Anker PowerPort 2 Elite¶
USB charger with 2 ports.
https://www.anker.com/ca/products/a2023?variant=41698567618724
Arduino Nano ESP32-S3¶
Console 5 Super Nintendo SNES Power Supply Adapter Plug Cable¶
https://console5.com/store/super-nintendo-snes-power-supply-adapter-plug-cable.html
Douk Audio Mixer MX3 (2-CH)¶
I had a lot of issues with the mixer at first, it had a lot of noise but I figured it out.
Only TRS cables must be used. TRRS cables will introduce a lot of noise.
The mixer has to be alone on an usb power supply or it will also introduce a lot of noise.
https://www.amazon.ca/gp/product/B09TKQ11NV/
..esp32s3mini
ESP32-S3 mini¶
FXPAK Pro¶
The flash cart I use for the Super Nintendo. It uses sd2snes.
HDMI Switch¶
I use the FiveHome 6 Port HDMI 2.0 Switcher I bought from https://www.amazon.ca/dp/B076XWNQP9?th=1.
It cannot be controlled via CEC, it has to be controlled with IR or with a physical button.
It appears to be incompatible with the Retrotink 4K.
HDMI Male and Female Test Board MINI Connector with Board PCB 2.54mm pitch 19/20pin DP HD A Female To Male Adapter Board¶
HDMI Proto Board¶
Hydra 2 Revised¶
Automatic SCART switch with 8 inputs and 2 output.
Keypad¶
See Keypad.
IR Leds¶
The leds I used are from Amazon Canada.
Reverse Polarity Converter Cable¶
Retrotink 4K¶
Upscaler for retro consoles. Upscales video up to 4K.
https://www.retrotink.com/product-page/retrotink-4k
I bought accessories for it:
Sound Blaster Recon 3D¶
Discontinued external Sound card with optical input.
UGREEN Nexode 65W¶
GaN charger with two USB-C PD ports of 45W and 20W.
https://www.ugreen.com/products/65w-3-ports-gan-fast-charger?variant=39915659591742
UGREEN Nexode 100W¶
GaN charger with three USB-C PD ports of 45W and 20W.
https://www.ugreen.com/products/65w-3-ports-gan-fast-charger?variant=39915659591742